4. Joints and Veins - Supplements
Contents
Terminology of Joints and Veins
Arrest line An arcuate ridge on a joint surface, located at a distance from the origin, where the joint front stopped or paused during propagation of the joint; also rib marks.
Columnar joints Joints that break rock into generally hexagonal columns; they form during cooling and contraction in hypabyssal intrusions or lava flows.
Conjugate system Two sets of joints oriented such that the dihedral angle between the sets is approximately 60°.
Continuous joints Throughgoing joints that can be traced across an outcrop, and perhaps across the countryside.
Cross joints Discontinuous joints that cut across the rock between two systematic joints, and are oriented at a high angle to the systematic joints.
Cross-strike joints Joints that cut across the general trend of fold hinges in a region of folded rocks (i.e., the joints cut across regional bedding strike).
Dessication cracks Joints formed in a layer of mud when it dries and shrinks; dessication cracks (or mud cracks) break the layer into roughly hexagonal plates.
Discontinuous joints Short joints that terminate within an outcrop, generally at the intersection with another joint.
En echelon An arrangement of parallel planes in a zone of fairly constant width; the planes are inclined to the borders of the zone and terminate at the borders of the zone. In an en echelon array, the component planes are of roughly equal length.
En echelon array An en echelon array consists of short parallel veins that lie between two parallel enveloping surfaces and are inclined at an angle to the surfaces. Typically, the veins in an en echelon array taper toward their terminations. The veins may be sigmoidal in cross section.
Exfoliation See sheeting joints.
Hackle zone The main part of a plumose structure, where the fracture surface is relatively rough due to microscopic irregularities in the joint surface formed when the crack surfaces get deflected in the neighborhood of grain-scale inclusions in the rock, or due to off-plane cracking (formation of small cracks adjacent to the main joint surface) as the fracture propagates.
Hooking The curving of one joint near its intersection with an earlier formed joint.
Inclusion A general term for any solid inhomogeneity (e.g., fossil, pebble, burrow, xenolith, amygdule, coarse grain, etc.) in a rock; inclusion may cause local stress concentrations.
Joint A natural, unfilled, planar or curviplanar fracture which forms by tensile loading (i.e., the walls of a joint move apart very slightly as the joint develops). Joint formation does not involve shear displacement.
Joint array Any group of joints (systematic or nonsystematic).
Joint density The surface area of joints per unit volume of rock (also referred to as joint intensity).
Joint origin The point on the joint (usually a flaw or inclusion) at which the fracture began to propagate; it is commonly marked by a dimple.
Joint set A group of systematic joints.
Joint stress shadow The region around a joint surface where joint-normal tensile stress is insufficient to cause new joints to form.
Joint system Two or more geometrically related sets of joints in a region.
Mirror region Portion of a joint surface adjacent to the joint origin where the surface is very smooth; mirrors do not occur if the rock contains many small-scale heterogeneities.
Mist region A portion of a joint surface surrounding the mirror where the fracture surface begins to roughen.
Nonsystematic arrayThe veins in nonsystematic arrays tend to be nonplanar, and individual veins may vary in width.
Nonsystematic joints A joint that is not necessarily planar, and is not parallel to nearby joints.
Orthogonal system Two sets of joints that are at right angles to one another.
Planar systematic array In a planar systematic array, the component veins are planar, are mutually parallel, and are regularly spaced.
Plume axis The axis of the plume in a plumose structure.
Plumose structure A subtle roughness on the surface of some joints (particularly those in fine-grained rocks) that macroscopically resembles the imprint of a feather.
Sheeting joints Joints formed near the ground surface that are roughly parallel to the ground surface; sheeting joints on domelike mountains make the mountains resemble delaminating onions; also called exfoliation.
Stockwork vein Stockwork veins comprise a cluster of irregularly shaped veins that occur in a pervasively fractured rock body. The veins are nonplanar arrays and occur in a range of orientations. In rock bodies with stockwork veins, as much as 40% or 50% of the outcrop is composed of vein material, and vein material may completely surround blocks of the host rock.
Strike-parallel joints Joints that parallel the general trend of fold-hinges in a region of folded strata (i.e., the joints parallel regional bedding strike).
Systematic joints Roughly planar joints which occur as part of a set in which the joints parallel one another, and which are relatively evenly spaced from one another.
Twist hackle One of a set of small en echelon joints formed along the edge of a larger joint; a twist hackle is not parallel to the larger joint, and forms when the fracture surface twists continuously into a different orientation and then breaks up into segments.
Vein A fracture that has filled with minerals precipitated from watery solutions that passed through the rock. Vein filling is fibrous of blocky.
Vein array A group of veins in a body of rock, typically formed by a single process.
Ashby, M. F., and Hallam, S. D., 1986. The failure of brittle solids containing small cracks under compressive stress states. Acta Metallurgica, 34, 498–510. Atkinson, B. K., 1987. Fracture mechanics of rock. London: Academic Press.
Bahat, D., and Engelder, T., 1984. Surface morphology on cross-fold joints of the Appalachian Plateau, New York and Pennsylvania. Tectonophysics, 104, 299–313.
Bai, T., and Pollard, D. D., 2000. Closely spaced fractures in layered rocks: initiation mechanism and propagation kinematics. Journal of Structural Geology, 22, 1409–1425. Beach, A., 1975. The geometry of en-echelon vein arrays. Tectonophysics, 28, 245–263.
Engelder, T., and Geiser, P. A., 1980. On the use of regional joint sets as trajectories of paleostress fields during the development of the Appalachian Plateau, New York. Journal of Geophysical Research, 85, 6319–6341.
Hancock, P. L., 1985. Brittle microtectonics: principles and practice. Journal of Structural Geology, 7, 438–457. Hodgson, R. A., 1961. Classification of structures on joint surfaces. American Journal of Science, 259, 493–502.
Kulander, B. R., Barton, C. C., and Dean, S. L., 1979. The application of fractography to core and outcrop fracture investigations: report to U.S. Department of Energy, Morgantown Energy Technology Center, METC/SP-79/3.
Narr, W., and Suppe, J., 1991. Joint spacing in sedimentary rocks. Journal of Structural Geology, 13, 1038–1048.
Nickelsen, R. P., and Hough, V. D., 1967. Jointing in the Appalachian Plateau of Pennsylvania. Geological Society of America Bulletin, 78, 609–630. Pollard, D. D., and Aydin, A., 1988. Progress in understanding jointing over the past century. Geological Society of America Bulletin, 100, 1181–1204.
Price, N. J., 1966. Fault and joint development in brittle and semi-brittle rock. Pergamon Press: London.
Ramsay, J. G., 1980. The crack-seal mechanism of rock deformation. Nature, 284, 135–139.
Reches, Z., 1976. Analysis of joints in two monoclines in Israel. Geological Society of America Bulletin, 87, 1654–1662.
Rives, T., Rawnsley, K. D., and Petit, J.-P., 1994. Analogue simulation of natural orthogonal joint set formation in brittle varnish. Journal of Structural Geology, 16, 419–429. Segall, P., 1984. Formation and growth of extensional fracture sets. Geological Society of America Bulletin, 94, 563–575.